|本期目录/Table of Contents|

[1]毕研磊,张永志,曹海坤,等.利用断层自动剖分技术反演汶川MW7.9地震滑动分布*[J].地震研究,2017,40(02):211-215.
　BI Yanlei,ZHANG Yongzhi,CAO Haikun,et al.The Wenchuan MW7.9 Earthquake Slip Distribution Inversion Based on Automated Fault Discretization Method[J].Journal of Seismological Research,2017,40(02):211-215.
点击复制

利用断层自动剖分技术反演汶川MW7.9地震滑动分布*(PDF/HTML)

《地震研究》[ISSN:1000-0666/CN:53-1062/P]

卷:
40
期数:
2017年02
页码:
211-215
栏目:
出版日期:
2017-04-23

文章信息/Info

Title:
The Wenchuan MW7.9 Earthquake Slip Distribution Inversion Based on Automated Fault Discretization Method
作者:
毕研磊; 张永志; 曹海坤; 杨九元; 杨珍
(长安大学 地质工程与测绘学院,陕西 西安 710064)
Author(s):
BI Yanlei; ZHANG Yongzhi; CAO Haikun; YANG Jiuyuan; YANG Zhen
(School of Geology Engineering and Geomatics,Chang’an University,Xi’an 710064,Shaanxi,China)
关键词:
断层自动剖分;  同震滑动分布;  位错元;  地震矩;  GPS数据
Keywords:
automated fault discretization;  coseismic slip distribution;  dislocation element;  seismic moment;  GPS data
分类号:
P315.241
DOI:
-
摘要:
基于GPS数据,利用断层自动剖分技术来反演汶川MW7.9同震滑动分布。反演结果显示:(1)断层自动剖分的滑动分布反演结果在各个位错元之间表现出良好的平滑性。(2)此次地震是一次逆冲型地震,并带有少量的右旋走滑分量。其中映秀―北川断裂滑动最大值为15 m,平均滑动量2.61 m; 灌县―江油断裂滑动的最大值为8 m,平均滑动量为1.58 m。反演得到此次地震的地震矩M0为9.153 8×1020 N·m,矩震级MW为7.91。(3)正演结果与实测数据对比显示,两者位移场在运动趋势上基本保持一致,拟合残差的均方误差在合理范围内,验证了断层自动剖分技术的可行性。
Abstract:
Based on GPS data,we have inversed the Wenchuan MW7.9 coseismic slip distributions by utilizing automated fault model discretization method. The results show:(1)The slip distributions based on automated fault model discretization appear well smooth.(2)It was a thrust-type earthquake with a small amount of right-lateral slip component. In Yingxiu-Beichuan fracture zone,the maximal sliding reached 15 m,average magnitude is 2.61 m. In the Guanxian-Jiangyou fracture zone,the maximal sliding reached 8 m,average sliding magnitude is 1.58 m. Meanwhile the inversed seismic moment M0 is 9.153 8×1020N·m corresponding to moment magnitude MW is 7.91.(3)The comparison between forward modeling results and the measured results shows that the displacement fields are consistent on the trend of movement,the root mean square error(RMSE)within a reasonable range,and this also verifies the feasibility of automated fault model discretization method.

参考文献/References:


陈丹蕾.2014.基于雷达差分干涉测量与断层自动剖分方法的地震震源参数反演[D].成都:西南交通大学.
国家重大科学工程“中国地壳运动观测网络”项目组.2008.GPS测定的2008年汶川MS8.0地震的同震位移场[J].中国科学:地球科学,38(10):1195-1206.
季灵运,刘立炜,郝明.2015.利用InSAR技术研究滇西南镇康—永德地区现今地壳形变特征[J].地震研究,38(1):84-89.
王敏.2009.基于GPS同震位移场约束反演2008年5.12汶川大地震破裂空间分布[J].地球物理学报,52(10):2519-2526.
王帅,张永志,姜永涛,等.2014.维多样性的动态权重粒子群算法反演断层滑动速率[J].地球物理学进展,(4):1766-1771.
王卫民,赵连锋,李娟,等.2008.四川汶川8.0级地震震源过程[J].地球物理学报,51(5):1403-1410.
温扬茂,何平,许才军,等.2012a.联合Envisat和ALOS卫星影像确定L’Aquila地震震源机制[J].地球物理学报,55(1):53-65.
温扬茂,许才军,刘洋,等.2012b.利用断层自动剖分技术的2008年青海大柴旦MW6.3级地震InSAR反演研究[J].武汉大学学报(信息科学版),37(4):458-462.
许才军,刘洋,温扬茂.2009.利用GPS资料反演汶川MW7.9级地震滑动分布[J].测绘学报,38(3):195-201,215.
张国宏,屈春燕,汪驰升,等.2010.基于GPS和InSAR反演汶川MW7.9地震断层滑动分布[J].大地测量与地球动力学,30(4):19-24.
张培震,徐锡伟,闻学泽,等.2008.2008年汶川8.0级地震发震断裂的滑动速率、复发周期和构造成因[J].地球物理学报,51(4):1066-1073.
张永志,王卫东,魏玉明,等.2006.利用GPS资料反演祁连山断层的三维滑动速率[J].大地测量与地球动力学,26(1):31-35.
BARNHART W D,LOHMAN R B.2010.Automated Fault Model Discretization for Inversions for Coseismic Slip Distributions[J].Journal of Geophysical Research:Solid Earth,115(B10),DOI:10.1029/2010JB007545.
FUNNING G J,PARSON B,WRIGHT T J,et al.2005.Surface Displacements and Source Parameters of the 2003 Bam(Iran)Earthquake from Envisat Advanced Synthetic Aperture Radar Imagery[J].Journal of Geophysical Research:Solid Earth,110(B9),DOI:10.1029/2004JB003338.
OKADA Y.1992.Internal deformation due to shear and tensile faults in a half-space[J].Bulletin of the Seismological Society of America,82(2):1018-1040.
USGS.2008.Magnitude 7.9-EASTERN SICHUAN,China[EB/OL].(2008)[2016-11-01].http://earthquake.usgs.gov/eqdenter/eqinthenews/2008/us2008ryan.

备注/Memo

备注/Memo:
收稿日期:2016-11-01
基金项目:国家自然科学基金(41374028)资助.

更新日期/Last Update: 2017-06-10